Menu X

Show inline popup
Remove item
Do you want to remove from your order?
Show inline popup
Remove Order
Do you want to delete this order?
Close
AquaPearl Water based Sealer mat 1L
AquaPearl Water based Sealer mat finish (1L)

AQUA PEARL WATER BASE SEALER FOR TILE AND STONE TIPS FROM PROS AQUA PEARL is characterized by its water-based formula and a no-sheen finish. The application of this type of sealer is easier due to the fluidity of the product. No odour is released during its application and it contains very low VOC levels, which makes it a very green product. This water-based sealer provides good performance 30 days after its application, the time required for complete curing. The drying time varies between 2 and 4 hours. It is recommended to apply 2 or 3 coats. RECOMMENDATIONS Recommended for slate, natural marble, limestone, sandstone, quarry tile and residential showers. Apply 2-3 coats. The number of coats depends on the porosity of the stone. Not recommended for porcelain, or ceramic with a low absorption rate. It is recommended to test a sample before starting the job. It is ideal for residential showers. Colour enhancement and sheen vary depending on the colour and porosity of the tile or stone.

AquaPearl Water based Sealer mat 1L

AquaPearl Water based Sealer mat finish (1L)

AQUA PEARL WATER BASE SEALER FOR TILE AND STONE TIPS FROM PROS AQUA PEARL is characterized by its water-based formula and a no-sheen finish. The application of this type of sealer is easier due to the fluidity of the product. No odour is released during its application and it contains very low VOC levels, which makes it a very green product. This water-based sealer provides good performance 30 days after its application, the time required for complete curing. The drying time varies between 2 and 4 hours. It is recommended to apply 2 or 3 coats. RECOMMENDATIONS Recommended for slate, natural marble, limestone, sandstone, quarry tile and residential showers. Apply 2-3 coats. The number of coats depends on the porosity of the stone. Not recommended for porcelain, or ceramic with a low absorption rate. It is recommended to test a sample before starting the job. It is ideal for residential showers. Colour enhancement and sheen vary depending on the colour and porosity of the tile or stone.
$36.56 /Each
PRFSCELLANT001L003D0
Inventory
Quebec City
Each
2
Total
2
Montreal
Each
4
Total
4

Technical Information

Product Code
PRFSCELLANT001L003D0
PRODUCT SHEET
PRODUCT TYPE
Vinyl and Tile
CATEGORY
Sealers and cleaners
SUBCATEGORY
Water based sealer

Use these details to plan your order with success

Units Quantities Lbs
Each 1.00 2.20
Carton 12.00 26.46
Skid 648.00 1428.59